D Series
Optex FA
La serie DR-Q permite la detección transparente y cuenta con la función AGC (Automatic Gain Control).
La serie BGS-DL está a la vanguardia de los sensores BGS, son lo último en detección de reflexión difusa.
La serie DT es para barreras (Thru-beam) de larga distancia (máx. 100 m).
Especificaciones
Model | Potentiometer adjustment type | |
Type | Thru-Beam | Retro reflective |
Cable type | DT-4000N (or 4000P) | DR-500N (or 500P) |
M8 connector type | DT-4000CN (or 4000CP) | DR-500CN (or 500CP) |
Sensing distance | 40 meter | 5 meter |
Spot size | 15mm/5 meter | 20mm/3.5 meter |
Sensitivity adjustment | 1-turn potentiometer | |
Supply voltage | DC10-30V including 10% ripple (P-P) | |
Power consumption | 40mA | 30 mA |
Response time | 0.5msec | |
Light source | Red Laser Diode 650nm, Max 2mW 4s, Class 2 | |
LED Indicator | Output indicator (orange), Laser emission (green) | |
Digital indicator | N/A | |
Control output | NPN or PNP open collector DC30V 100mA max | |
Operation mode | Light/Dark On switchable | |
Ambient temp / humidity | -10 to 50 ? / 35-95% RH | |
Insulation resistance | 20M Ohm or more (at 500V DC) | |
Protection category | IP67 | |
Conformity | IEC, CE | |
Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X,Y, and Z directions | |
Shock resistance | Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions | |
Environmental illuminance | Sunlight : 10,000 lux, Incandescent lamp : 3,000 lux max | |
Materials | ABS (housing), PMMA (lens) |
Cable type |
DR-Q150TN (or Q150TP) | DR-Q400TN (or Q400TP) |
M8 connector type | DR-Q150TCN (or Q150TCP) | DR-Q400TCN (or Q400TCP) |
Sensing distance | 1.5 meter | 4 meter |
Spot size | 15mm / 1.5 meter | 20mm / 3.5 meter |
Sensitivity adjustment | Pushbutton teach with fine adjustment button | |
Supply voltage | DC10-30V including 10% ripple (P-P) | |
Power consumption | 35mA | |
Response time | 0.7 msec | |
Timer | Off delay/On delay/One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec) | |
Light source | Red Laser Diode 650nm, Max 2mW 4μs, Class 2 | |
LED Indicator | Output indicator (orange), Laser emission (green) | |
Digital indicator | 7 segment, 3 digit Red LED | |
Control output | NPN or PNP open collector DC30V 100mA max | |
Operation mode | Light/Dark On selectable | |
Ambient temp / humidity | -10 to 50 ? / 35-95% RH | |
Insulation resistance | 20M Ohm or more (at 500V DC) | |
Protection category | IP67 | |
Conformity | IEC, CE | |
Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X,Y, and Z directions | |
Shock resistance | Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions | |
Environmental illuminance | Sunlight : 10,000 lux, Incandescent lamp : 3,000 lux max | |
Materials | ABS (housing), PMMA (lens) |